The Global Precipitation Measurement Core (GPM) Observatory is scheduled to launch on Feb. 27 from Tanegashima Space Center, Japan. Global Precipitation Measurement (GPM) is a joint mission between NASA and the Japan Aerospace Exploration Agency (JAXA). GPM is the first coordinated international satellite network to provide near real-time observations of rain and snow every three hours anywhere on the globe. On Feb. 11, the Core Observatory was moved into the spacecraft fairing assembly building and into the Encapsulation Hall. Final inspections and preparations were completed for the installation into the fairing, which began on Feb 13. The fairing is the part of the rocket that will contain the spacecraft at the top of the H-IIA rocket. The encapsulation process for the H-IIA is very different than for most U.S. rockets. For U.S. rockets, the fairing is usually in two pieces that close around the payload like a clamshell. To install the GPM Core Observatory into the fairing of the H-IIA rocket, first the Core Observatory and the Payload Attach Fitting (PAF) are set up in scaffolding in the Encapsulation Hall. Then, the fairing is lifted above and lowered onto the fitting. When only a few feet remain above the final position, stanchions support the fairing while technicians go inside to complete the electrical connections. When this is completed, they remove the stanchions and lower the fairing to its final position, where it is bolted in place. Credit: Japan Aerospace Exploration Agency #nasagoddard #gpm #jaxa #space

nasagoddardさん(@nasagoddard)が投稿した動画 -

NASAのインスタグラム(nasagoddard) - 2月22日 04時18分


The Global Precipitation Measurement Core (GPM) Observatory is scheduled to launch on Feb. 27 from Tanegashima Space Center, Japan. Global Precipitation Measurement (GPM) is a joint mission between NASA and the Japan Aerospace Exploration Agency (JAXA). GPM is the first coordinated international satellite network to provide near real-time observations of rain and snow every three hours anywhere on the globe.

On Feb. 11, the Core Observatory was moved into the spacecraft fairing assembly building and into the Encapsulation Hall. Final inspections and preparations were completed for the installation into the fairing, which began on Feb 13. The fairing is the part of the rocket that will contain the spacecraft at the top of the H-IIA rocket.

The encapsulation process for the H-IIA is very different than for most U.S. rockets. For U.S. rockets, the fairing is usually in two pieces that close around the payload like a clamshell. To install the GPM Core Observatory into the fairing of the H-IIA rocket, first the Core Observatory and the Payload Attach Fitting (PAF) are set up in scaffolding in the Encapsulation Hall. Then, the fairing is lifted above and lowered onto the fitting. When only a few feet remain above the final position, stanchions support the fairing while technicians go inside to complete the electrical connections. When this is completed, they remove the stanchions and lower the fairing to its final position, where it is bolted in place.

Credit: Japan Aerospace Exploration Agency #nasagoddard #gpm #jaxa #space


[BIHAKUEN]UVシールド(UVShield)

>> 飲む日焼け止め!「UVシールド」を購入する

10,640

59

2014/2/22

フラビアアレッサンドラのインスタグラム

NASAの最新のインスタ

NASAを見た方におすすめの有名人